 |
 |
 |
 |
|
|
 |
 |
|
|
 |
 |
|
|
 |
|
 02 Dec 2005, 8:03 AM
|
Kixx
Joined on 12-02-2005
Posts 2
|
Route between two SMD Pins
|
|
|
Hi
I want to manual Route between to Pins of an SO-8 device but Capture
do not draw the Route. The Airline is OK between the two Routing Points (not the Pins of the SO-8 IC).
I have used the Standard IC from the Libary (Part Manager) and i have not
Change the Padstack from the Original.
Thanks
Kixx
P.S. Sorry for the Bad Englisch if anybody find an mistake he can keep it ;-)
|
|
|
|
|
|
|
|
|
02 Dec 2005, 12:27 PM
|
cseltzer
Joined on 06-11-2002
Largo, FL
Posts 853
|
Re: Route between two SMD Pins
|
|
|
Kixx,
It sounds like you need to adjust the Global Spacing Rules for your design. Click on "Options", "Global Spacing" on the menu bar. A window will pop up showing the rules for the different layers. You can double click on a single rule or row of rules; or you can highlight multiple rules or rows and rightclick select properties and adjust as many or the rules as you need to.
Chris Seltzer
|
|
| |
|
|
|
|
|
|
|
|
03 Dec 2005, 5:58 AM
|
Kixx
Joined on 12-02-2005
Posts 2
|
Re: Route between two SMD Pins
|
|
|
Hi @cseltzer,
thanks that was it.
Kixx
|
|
|
|
|
|
|
|
|
|
OrCAD Community » OrCAD Community Forums » Power Nets & Pins » Re: Route between two SMD Pins
|
|
|
|